Ceramic tube - Type 220

The Type 220 ceramic tube, as a new type of ceramic cyclone, uses clay and latest technological strength with its unique design style. It is sintered at a high temperature of 1300 degrees. Not only does it have stable chemical properties, being resistant to acids, alkalis, high temperatures and wear, but it also has a relatively high flexural strength. The inner and outer surfaces of the ceramic pipe are smooth, preventing blockages and prolonging the service life of the product.

The characteristic of the φ220 ceramic tube is that its cyclone separation section has an integral air - tight structure, thus overcoming the defects of the multi - section structure, which is prone to air leakage and affects dust removal efficiency. At the bottom of the cyclone tube, a flared seat skirt and a conical insertion head structure are adopted, making it more convenient to connect with the bottom ash hopper. There are multiple ventilation holes on the peripheral surface of the flared skirt, which can prevent the ceramic cyclone dust - collection tube from cracking during firing and improve the production yield.

The exhaust pipe, the inlet cyclone body and the cyclone separation cone of the cyclone separation section are made into one piece, and the exhaust pipe is made to go in and out of the wind plane. There is a flared interface for connection at its end. In this way, the φ220 ceramic tube has an integral and joint - less structure in the cyclone separation section, which can avoid possible air leakage at the joints and the uneven inner wall caused by butt - jointing, ensuring the cyclone separation effect.

The single set of Type 220 ceramic tubes can handle a volume of 500 cubic meters per hour. It is the most core component of the multi - tube dust collector and can handle the high - temperature flue gas at the back end of the boiler. When using Type 220 ceramic tubes in a multi - tube dust collector to handle the same air volume, more ceramic tubes need to be arranged, which brings better dust removal effects. For boilers with low dust content, it can achieve higher dust removal efficiency. The disadvantage is that due to the reduction of the air - handling capacity, the number of ceramic tubes used increases, which increases the cost of the multi - tube dust collector and the price goes up.

With strict quality control and proven on-site performance, our φ220 ceramic cyclone is a reliable choice for original equipment manufacturers and system integrators in Europe, Southeast Asia and other regions.

Manufacturing & Production Capacity

After-Sales Service

Haina provides on-site installation, commissioning and technical training.Regular follow-up inspections are arranged after project delivery to support long-term operation stability.