Desulfurization spray tower (magnesium oxide method)

HLP type desulfurization spray tower is the main equipment for SO2 absorption and purification. There are two types of spray tower: large size tower and small and medium-sized tower .It can continuously and efficiently purify flue gas in an instant. Because of the advantages of simple structure and mature technology, spray tower is widely used in large power plants, small and medium-sized industrial boiler flue gas treatment.

  • Information

Product Overview


HLP-I Desulfurization Spray Tower


The materials of the tower body can be divided intoSteel lining scale resin cement

Steel lining granite

Fiberglass
Stainless steel


desulfurization spray tower (magnesium oxide method)


HLP type desulfurization spray tower is the main equipment for SO2 absorption and purification. There are two types of spray tower: large size tower and small and medium-sized tower .It can continuously and efficiently purify flue gas in an instant. Because of the advantages of simple structure and mature technology, spray tower is widely used in large power plants, small and medium-sized industrial boiler flue gas treatment.


 magnesium oxide desulfurization spray tower  MgO wet desulfurization tower  desulfurization spray tower (magnesium oxide method)


Applicable IndustriesPower industry
Metallurgical industry
Metallurgical industry
Iron and steel industry
Cement industry
Industrial boiler, etc.

 

Characteristics

 1. More contact area and contact time between the connection of gas and liquid;

2. Strong disturbance and high SO2 absorption efficiency; Stable operation with appropriate operation flexibility;

3. The pressure drop is small when the air flow passes through;

4. Simple structure, easy maintenance and long service life;

5. No scaling, no blocking, wear resistance, corrosion resistance, high temperature resistance.

 

Desulfurization technology of magnesium oxide is a mature desulfurization technology. Compared with calcium method, it avoids a series of problems existing in simple wet method. In terms of its chemical reactivity, magnesium oxide is much larger than calcium-based absobent, and since the molecular weight of magnesium oxide is smaller than that of calcium carbonate and calcium oxide, the desulfurization efficiency of magnesium oxide is higher than that of calcium oxide under the same other conditions.

If the size of magnesium oxide purchased from the slurry preparation system meets the desulfurization requirements, the slurry with the concentration of 15-25% can be made directly into the digester without grinding. Then it is pumped to the absorber through slurry conveying to complete the desulfurization purpose. The slurry circulates continuously in the tower, reacts with sulfur dioxide and becomes magnesium sulfite, which is forced to oxidize into magnesium sulfate solution. When the slurry concentration reaches a certain degree, the slurry output pump is discharged to the slurry treatment system for dehydration and drying.


 magnesium oxide desulfurization spray tower  MgO wet desulfurization tower  desulfurization spray tower (magnesium oxide method)


The flow velocity of the rising airflow inside the desulfurization tower is 3 - 3.5 m/s; the flow velocity at the demister section is 4.5 m/s, and the desulfurization efficiency and dehydration efficiency are optimal. The water carry - over in the desulfurization tower is related to the pump selection, the form of the demister, the boiler load, and the gas flow velocity, etc.


The important anti - corrosion measure of the company is the steel - lined granite structure, which adopts the process of a four - layer glass fiber reinforced plastic inner liner and resin mortar - lined granite. Compared with traditional FRP or glass flake anti - corrosion materials, its anti - corrosion performance is significantly improved, it can better cope with complex operating environments, and it also greatly extends the service life of the equipment.


Why Choose Us


Basic InformationEstablished1995
Registered CapitalRMB 68 million
Annual Output ValueOver RMB 200 million
ScaleTotal Employees150
Manufacturing Area35,000 ㎡
Project ExperienceTotal Engineering ProjectsNearly 500
Denitrification Systems Delivered~3,000 units
Dust Removal Systems Delivered~10,000 units
Desulfurization Systems Delivered~5,000 units
Wet Electrostatic Systems Delivered~250 units
TechnologyPatents50+
Market CoverageExport RegionsAfrica, South America, Southeast Asia


Manufacturing & Production Capacity

magnesium oxide desulfurization spray tower


After-Sales Service

Haina provides on-site installation, commissioning and technical training.Regular follow-up inspections are arranged after project delivery to support long-term operation stability.


MgO wet desulfurization tower

Quality Management SystemCertification Certificate

desulfurization spray tower (magnesium oxide method)

Occupational Health and Safety Management System Certification Certificate

magnesium oxide desulfurization spray tower

Certificate of After-Sales Service Certification for Products

MgO wet desulfurization tower

Environmental Management System Certification Certificate



Get the latest price? We'll respond as soon as possible(within 12 hours)
This field is required
This field is required
Required and valid email address
This field is required
This field is required
For a better browsing experience, we recommend that you use Chrome, Firefox, Safari and Edge browsers.